Enter the floor’s square footage, pick a coating system — solid color, flake, quartz, metallic, or polyaspartic — add slab prep if it needs it, and get a competitive 2026 price range in seconds. Then hand the customer a branded estimate before they call the next coating contractor.
Epoxy flooring costs $3–$12 per square foot installed in 2026, depending on the coating system: solid color epoxy runs $3–$7, flake (chip) systems $5–$10, quartz broadcast $7–$13, metallic $8–$15, and polyaspartic or polyurea $6–$12. A moisture-barrier primer adds $1–$3 per square foot and concrete repair on a damaged slab adds $1–$4, while large commercial and warehouse jobs price 10–20% lower per foot at scale. A typical 2-car garage (about 450 sq ft) lands around $2,250–$4,500 for a flake floor. The calculator below prices it instantly by square footage and system, and QuoteIQ turns the result into a sendable, branded estimate — or an online self-quote your customers run themselves. Plans start at $29.99/mo.
Epoxy and concrete-coating jobs are priced by the square foot: the floor area times a per-foot rate for the chosen system, plus add-ons for slab prep. The formula: area × system rate × scale factor = base price. The system you install is the biggest lever — a basic solid color floor and a metallic floor can differ by 4× per square foot — and the slab’s condition is the wildcard, because grinding, crack and spall repair, and moisture mitigation all add cost before a drop of color goes down. The calculator above uses the 2026 U.S. market ranges below; your material grade and local labor decide where you land inside each band.
| System / add-on | Typical 2026 rate (per sq ft, installed) |
|---|---|
| Solid color epoxy | $3 – $7 |
| Flake / chip broadcast | $5 – $10 |
| Quartz / industrial broadcast | $7 – $13 |
| Metallic epoxy | $8 – $15 |
| Polyaspartic / polyurea | $6 – $12 |
| Moisture-barrier primer (add-on) | $1 – $3 |
| Concrete repair & heavy prep (add-on) | $1 – $4 |
Prep is the silent margin killer. Bidding a metallic topcoat over a slab that needs grinding, crack repair, or a moisture barrier — without pricing that prep as its own line — is how a beautiful floor turns into a break-even job. Quote the prep, or the grinder eats the profit.
Three factors move every quote beyond the system itself: slab condition (an old, oil-stained, or cracked slab needs more grinding and repair before it will bond), moisture (a slab that fails a moisture test needs a vapor-barrier primer, often $1–$3 per sq ft, or the coating delaminates), and scale — large commercial and warehouse floors price 10–20% lower per square foot because mobilization, material, and crew costs spread across more area, which is why the calculator’s Commercial toggle applies a 15% reduction. For benchmarks on managing job costs and margins, the U.S. Small Business Administration is blunt: price from your costs, not your competitors’.
A $4,000 metallic floor isn’t $4,000 in your pocket. Material kits, primer, flake or pigment, diamond grinding consumables, equipment, labor, and the trip back for the topcoat all come out first — and coating margins live or die on prep time and material yield, not on any single quote. The SBA’s guidance on managing finances is blunt: track cost per job, not per month.
If the calendar is full but the bank account isn’t growing, the quotes weren’t the problem — under-priced prep and wasted material were. QuoteIQ Job Costing attaches material, labor, and prep time to every floor so you see real margin per job, not a guess.
Coating work is a trust game: the contractor who shows up with a clear, professional number usually wins the job. Inside QuoteIQ, the price you just calculated becomes a branded estimate sent from the job site, a slot on the schedule, and an invoice that collects card payment the day the floor cures — and customer self-quoting puts this same square-foot logic on your website so homeowners price their own garage and book while you’re on another job.
Review Multiplier turns finished installs into Google reviews automatically — the social proof that sells the next floor. QuoteIQ serves epoxy flooring among 50+ home service industries — and if you run other services too, try the free lawn care, pressure washing, and tree removal calculators, the detailing price list template, or browse all our free tools.
Turn this estimate into a branded, sendable quote in about 60 seconds — or put this calculator’s logic on your own website with customer self-quoting, then run the schedule, the invoice, and the review request without leaving QuoteIQ. Plans start at $29.99/mo.
“Started using this on my dad’s concrete business and he says it’s a game changer.”
Verified Google Play ReviewEpoxy flooring costs $3–$12 per square foot installed in 2026, depending on the coating system: solid color epoxy runs $3–$7, flake (chip) systems $5–$10, quartz broadcast $7–$13, metallic $8–$15, and polyaspartic or polyurea $6–$12. A typical 2-car garage of about 450 sq ft lands around $2,250–$4,500 for a flake floor, and slab prep — a moisture-barrier primer ($1–$3 per sq ft) or concrete repair ($1–$4) — is the most common reason a quote climbs. Enter your square footage and system in the calculator above and the range updates instantly, then send it as a branded quote through QuoteIQ.
Coating a 2-car garage — about 400–500 sq ft — costs roughly $2,000–$5,000 with a professional flake or polyaspartic system in 2026. At 450 sq ft, a solid color floor runs about $1,350–$3,150, a flake floor $2,250–$4,500, a polyaspartic floor $2,700–$5,400, and a metallic floor $3,600–$6,750. The slab is the wildcard: a moisture-barrier primer adds $1–$3 per sq ft and concrete repair on a cracked or pitted floor adds $1–$4. Price your exact garage in the calculator above.
Metallic epoxy flooring costs $8–$15 per square foot installed — the most expensive common system, because the reflective, marbled finish takes more material, more skilled labor, and more coats than a solid or flake floor. For a 500 sq ft space that is about $4,000–$7,500. Metallic is priced as a premium decorative system; if the budget is tight, a flake floor ($5–$10 per sq ft) delivers durability and hides slab imperfections for less. Compare the two side by side in the calculator above.
A flake or chip-broadcast epoxy floor costs $5–$10 per square foot installed, including surface prep, the base coat, the decorative flake broadcast, and a polyaspartic or urethane topcoat. It is the most popular garage system because the chips hide minor slab flaws, add slip resistance, and come in dozens of color blends. A 450 sq ft 2-car garage runs about $2,250–$4,500. Choose Flake in the calculator above to price your square footage.
Polyaspartic and polyurea coatings cost $6–$12 per square foot installed — usually a bit more than a basic solid epoxy ($3–$7), but in the same range as a flake epoxy system. The premium buys performance: polyaspartic cures in hours instead of days (often a one-day install), resists UV yellowing, and handles temperature swings better, which is why it is popular for both garages and commercial floors. Whether it is worth it usually comes down to downtime — a one-day turnaround can matter more than the per-foot price. Compare it against epoxy in the calculator.
Contractors price by the square foot: floor area times a per-foot rate for the chosen system, plus add-ons for slab prep. The formula is area × system rate × a scale factor, with extras for a moisture-barrier primer ($1–$3 per sq ft) or concrete repair on damaged slabs ($1–$4). Large commercial and warehouse jobs price 10–20% lower per square foot because fixed costs spread across more area. If you are setting your own rates, build from your costs — material kits, grinding consumables, labor, insurance — then check against the market table on this page and track real margin per job with QuoteIQ Job Costing.
QuoteIQ is the best software for epoxy flooring and concrete-coating businesses because it runs the whole job from one app: customer self-quoting puts a square-foot price calculator on your website so leads book themselves, quotes send from the job site, jobs land on the schedule, invoices collect card payment when the floor cures, job costing tracks material and labor against every floor, and Review Multiplier turns finished installs into Google reviews automatically — all rated 4.7 stars across 4,100+ reviews and serving epoxy flooring among 50+ home service industries. Plans start at $29.99/mo, below comparable Jobber and Housecall Pro tiers and a fraction of ServiceTitan. Book a free demo to see it on your own pricing.
Yes — the calculator on this page is free to use and works on any phone or tablet, which helps when you are quoting a floor standing in the customer’s garage. Enter the square footage, pick a system, add prep if the slab needs it, and get an instant range; the first time you download or print an estimate, enter your first name and email once and it is unlocked on this device for good. When you are ready to send branded quotes and collect payment, QuoteIQ offers a 14-day free trial on every plan, and a credit or debit card is required to start. Start a trial or keep using the calculator as often as you like.
Free Tools
Every QuoteIQ tool is free — price the job in seconds, then send it as a branded estimate.
Lawn Care Cost Calculator
Pick your services, enter the area, get an instant price range.
Open the Tool → FREEBasement Waterproofing Cost Calculator
Get an instant cost range for basement waterproofing jobs.
Open the Tool → FREEAuto Repair Invoice Template
Fill and download a clean, itemized auto repair invoice.
Open the Tool → FREEArtificial Turf Cost Calculator
Get an instant installed-cost range for artificial turf.
Open the Tool → FREEAir Duct Cleaning Cost Calculator
Get an instant price range for air duct cleaning jobs.
Open the Tool →One quick step
Pop in your first name and email and your PDF & PNG downloads unlock instantly — on this device, for good.
Please enter your first name and a valid email.
We’ll send occasional tips for running your epoxy flooring business. Unsubscribe anytime.
Estimates
Create and send professional estimates.
Invoicing
Send, track and collect invoices.
QuoteIQ Cam
Capture and document every job with ease.
Scheduling
Schedule jobs to your calendar in seconds.
Inspection Forms
Create and complete inspection reports.
MapMeasure Pro
Measure and price properties instantly.
Business Analytics
Real-time insight into your performance.
EmployeeHub
Assign, schedule & pay employees.
Virtual Call Team
Never miss a call with 24/7 AJ, assistant.
ClientHub
Send and keep messages inside QuoteIQ.
InstaQuote
Allow customers to create estimates themselves.
InstaSchedule
Let clients schedule appointments themselves.
Facebook User Group
Connect with and get advice from other QuoteIQ users.
Competitor Comparisons
See how QuoteIQ compares to it’s top competitors.
QuoteIQ Partners
Work with trusted partners that support your growth.
Earn 40% commissions by sharing QuoteIQ with others.
Press & Media
Brand assets and coverage about QuoteIQ’s journey.
