MapMeasure Pro measures roofs, driveways, lawns, and exteriors from satellite — automatically with AI or manually with pin-drop precision. Auto-detect roof pitch, calculate true square footage, and price the job before your competition shows up.
MapMeasure Pro lives inside the estimate builder. Type the address, let AI handle the heavy lifting — or drop pins yourself. Either way, the measurement and the estimate are built on the same screen.
Start a new estimate or open an existing one. The customer’s address loads the satellite view automatically.
Let AI auto-detect the roof, lawn, or driveway — or switch to manual mode and drop pins yourself for full control.
Area, perimeter, and roof pitch calculate in real time. Choose from multiple unit types to match your pricing method.
Apply your pricing directly to the measurement and send a professional estimate — all from one screen.
QuoteIQ added two AI capabilities to MapMeasure Pro: AI Measurement to auto-detect property boundaries, and AI Pitch Detection to read the slope of any roof from satellite. Together they replace the slowest, most error-prone parts of remote estimating.
No more dropping pins around every corner of the roof. AI Measurement reads the satellite imagery, identifies the structure, and traces the boundary for you — roof outline, lawn perimeter, or driveway shape — in under a few seconds. Review, tweak, and price.
A roof’s footprint isn’t its surface area. A 2,000 sq ft roof footprint at a 9/12 pitch is closer to 2,500 sq ft of actual material. AI Pitch Detection reads the slope of the roof from satellite and applies the right multiplier — so your bid covers the real square footage, not the flat math.
AI is optional, not required. When you need pixel-level precision — odd-shaped patios, partial roof sections, irregular lawns — switch to manual mode and draw the polygon yourself. Same engine, same units, same one-screen workflow.
Switch to Linear Mode to place two-point lines for straight-edge measurements. Measure gutter runs, fence lines, walkway edges, and any linear surface — with real-time perimeter calculations as you draw.
Let AI auto-trace the lawn boundary, or refine the polygon by hand. Either way, you get total area in seconds. No more driving across town just to eyeball a yard. Quote accurately, close faster, move on.
MapMeasure Pro works on your phone, iPad, or desktop browser. AI Measurement and AI Pitch Detection run on every device. Whether you’re in the truck between jobs or quoting from the office, the same tools are always at your fingertips.
MapMeasure Pro isn’t just a measuring tool — it’s the AI-powered quoting workspace that lives inside QuoteIQ.
Auto-detect roofs, lawns, and driveways from satellite imagery. Type the address — AI draws the polygon for you.
Reads roof slope from satellite and applies the correct multiplier so your roof square footage reflects real surface area.
Powered by Google Maps satellite view. See the actual property in detail before placing any measurements.
See the property from the street directly inside QuoteIQ. Verify siding material, roof pitch, and obstacles before quoting.
View Zillow property insights directly inside QuoteIQ — home value, lot size, and property details without switching apps.
Change marker colors, polygon fill and border colors, opacity, border width, and toggle between Mouse Mode and Linear Mode.
Every measurement saves to the customer’s profile. When they call back next season, the data is already there.
Screenshot your MapMeasure Pro layout and attach it to quotes and invoices to show customers exactly what’s being priced.
Phone, tablet, or desktop — same AI tools, same satellite data, same one-screen workflow on every device, iOS or Android.
MapMeasure Pro supports a wide range of area and perimeter units — so your measurements match your pricing method exactly.
Most CRM platforms don’t offer satellite property measurement at any price. AI auto-trace and pitch detection are even rarer — usually only available in standalone $50–$300/mo measurement tools.
| Feature | QuoteIQ (MapMeasure Pro) | Jobber / Housecall Pro |
|---|---|---|
| Satellite Property Measurement | ✓ Built-in | ✗ Not available at any price |
| AI Auto-Measurement | ✓ Included | ✗ Not available |
| AI Roof Pitch Detection | ✓ Included | ✗ Not available |
| Built Into Estimate Creation | ✓ Same screen | ✗ N/A |
| Area & Perimeter Calculation | ✓ Multiple units | ✗ N/A |
| Street View | ✓ Included | ✗ Not available |
| Zillow Property Insights | ✓ Included | ✗ Not available |
| Linear Mode for Fences/Gutters | ✓ Included | ✗ N/A |
| Save Measurements to Profile | ✓ Automatic | ✗ N/A |
| Price | Included from $74.99/mo | Requires separate tool ($30–$300+/mo) |
Measure full exterior surface area for pressure washing, painting, or siding quotes.
Calculate true roof surface area with AI-detected pitch for roofing, gutters, and lighting estimates.
AI traces yard boundaries to price mowing, fertilizing, seeding, and landscaping work.
Measure driveways and walkways for concrete, sealcoating, snow removal, and pressure washing.
Calculate deck and patio area for staining, sealing, cleaning, or building estimates.
Use Linear Mode to measure fence lines for fencing, staining, or pressure washing quotes.
Zoom in and count windows, doors, and other features to build accurate window cleaning quotes.
Measure gutter runs with Linear Mode for gutter cleaning and installation pricing.
Available on Beginner, Pro, Elite, and Max plans. Not available on Essentials ($29.99/mo). All AI features (AI Measurement, AI Pitch Detection) are included on every plan that includes MapMeasure Pro.
2 users included
4 users included
10 users included
Unlimited users
Quote more jobs per day without driving to every property. AI Measurement on the Beginner plan pays for itself the first week.
Office staff measure and quote while crews stay in the field. Everyone sees the same AI traces and measurements on the same customer profile.
Pre-qualify leads with AI auto-measurement before committing to site visits. Route your sales team to only the jobs worth quoting in person.
Yes. MapMeasure Pro includes two AI features: AI Measurement, which automatically traces roofs, lawns, and driveways from satellite imagery, and AI Pitch Detection, which reads the slope of any roof and applies the correct multiplier for accurate square footage. Both are included on Beginner, Pro, Elite, and Max plans at no extra cost.
AI Pitch Detection analyzes the satellite imagery of a roof and identifies its slope. It then applies the right pitch multiplier so your measurement reflects the true surface area instead of just the flat footprint. A 2,000 sq ft footprint at a 9/12 pitch, for example, is closer to 2,500 sq ft of actual roofing material — and AI Pitch Detection accounts for that automatically before you price the job.
Yes. AI Measurement detects the property boundary from satellite imagery — roof outline, lawn perimeter, or driveway shape — in roughly three seconds. The AI’s polygon is fully editable, so you can fine-tune it before pricing if needed. Manual pin-drop mode is always available as a fallback.
Many contractors compare tools like EagleView, Roofr, and Hosta.ai, but QuoteIQ’s MapMeasure Pro stands out because it’s built directly into the estimate creation phase and includes AI auto-measurement plus AI roof pitch detection at no extra cost. You measure the property and build the quote on the same screen — no switching between apps or paying for a separate measurement subscription.
Open the customer’s estimate, load the satellite view, and either let AI Measurement auto-trace the property or drop pins manually. Area, perimeter, and (for roofs) AI-detected pitch calculate in real time. No site visit needed, no separate tool required.
Yes — and speed wins jobs. Contractors who quote within the first hour are significantly more likely to win the work. With AI Measurement, you can measure and price a property in under a minute, so you can send a professional estimate before your competition even drives to the site.
For area: square feet, square meters, square kilometers, hectares, nautical miles, square yards, square miles, and acres. For perimeter and linear measurements: cm, m, km, nmi, in, ft, yd, mi, and smoots. You can switch between units at any time.
MapMeasure Pro uses high-resolution satellite imagery and provides measurements accurate enough for quoting, materials planning, and pricing — without an on-site visit. With AI Pitch Detection added in, roof square footage is materially more accurate than flat-footprint measurement tools, which historically under-quote sloped roofs by 15–25%.
No. Neither Jobber nor Housecall Pro offers satellite property measurement, AI auto-trace, or AI pitch detection at any price — native or through integrations. Contractors using those platforms must visit every property in person, eyeball pitch, or pay for a separate $50–$300/mo tool. MapMeasure Pro with AI is included in QuoteIQ starting at $74.99/mo.
Yes. MapMeasure Pro lets you change marker color, polygon fill color, polygon border color, border width, and fill opacity. You can also toggle between Mouse Mode (click to place pins), Linear Mode (two-point straight lines), and AI Mode, and reset settings to defaults at any time.
MapMeasure Pro — including AI Measurement, AI Pitch Detection, Street View, Zillow Quick Access, and all drawing tools — is included on Beginner ($74.99/mo), Pro ($149.99/mo), Elite ($299/mo), and Max ($699/mo) plans. It is not available on the Essentials plan ($29.99/mo).
QuoteIQ is the all-in-one CRM for home service contractors. MapMeasure Pro is one of dozens of features built into the same workflow — no integrations, no extra subscriptions.
Create and send professional estimates with line items, options, and packages.
Learn more →Let AI run your QuoteIQ workflows — schedule jobs, send messages, follow up.
Learn more →Conversational AI inside QuoteIQ that helps you build quotes, draft messages, and answer questions.
Learn more →Switching from another CRM? AI maps and imports your customer CSV data into QuoteIQ automatically.
Learn more →Inspection forms, job reports, and AI before-and-after photo editor — all in one camera.
Learn more →Calendar, dispatching, route optimization, and Google Calendar sync — built in.
Learn more →Embed a self-quoting tool on your website so customers price themselves and book in.
Learn more →Visualize your sales and job pipeline. Forecast revenue. Spot stalled deals.
Learn more →Join 40,000+ contractors who measure, quote, and win jobs from anywhere with MapMeasure Pro — now with AI auto-measurement and AI roof pitch detection.
Book Your Free Demo →
Estimates
Create and send professional estimates.
Invoicing
Send, track and collect invoices.
QuoteIQ Cam
Capture and document every job with ease.
Scheduling
Schedule jobs to your calendar in seconds.
Inspection Forms
Create and complete inspection reports.
MapMeasure Pro
Measure and price properties instantly.
Business Analytics
Real-time insight into your performance.
EmployeeHub
Assign, schedule & pay employees.
Virtual Call Team
Never miss a call with 24/7 AJ, assistant.
ClientHub
Send and keep messages inside QuoteIQ.
InstaQuote
Allow customers to create estimates themselves.
InstaSchedule
Let clients schedule appointments themselves.
Facebook User Group
Connect with and get advice from other QuoteIQ users.
Competitor Comparisons
See how QuoteIQ compares to it’s top competitors.
QuoteIQ Partners
Work with trusted partners that support your growth.
Earn 40% commissions by sharing QuoteIQ with others.
Press & Media
Brand assets and coverage about QuoteIQ’s journey.
