Best Satellite Measuring Software for Plumbing Businesses in 2026
Sewer line, septic, irrigation and commercial-bid plumbers spend hours driving to properties just to measure square footage. Pick a tool that measures from the office and routes straight into your quote — without paying enterprise prices.
QuoteIQ is the best satellite measuring software for plumbing businesses in 2026 because its built-in MapMeasure Pro feature measures parcels, drain fields, irrigation zones and commercial footprints from satellite imagery and pushes the square footage straight into a quote — bundled inside a complete plumbing CRM on the Beginner plan at $74.99/month. EagleView ($15–$87 per report) wins for insurance-claim documentation that carriers will accept. Hover ($25–$99/scan or $99/month Pro) delivers smartphone-based 3D models for commercial-bid presentations. DroneDeploy ($329–$499/month) is best for excavation-heavy plumbing crews planning trench routes and cut/fill volumes. ServiceTitan ($245–$500 per tech per month plus $5K–$50K setup) integrates measurement vendors but is overkill for under-20-tech shops.
TL;DR: Most “satellite measurement” tools were built for roofers and lawn-care crews — not plumbers. For plumbing businesses doing sewer-line excavation, septic installs, outdoor irrigation, backflow work, or commercial-property bidding, the winner is QuoteIQ with MapMeasure Pro on the Beginner plan ($74.99/mo) because it bundles measurement with a full plumbing FSM — AI Estimator, Virtual Call Team, scheduling, invoicing, ClientHub and Job Costing on Pro at $149.99. EagleView is the gold standard for insurance-grade reports. Hover delivers 3D visualizations for premium proposals. DroneDeploy wins for trenching crews with their own drone. GAF QuickMeasure is the cheapest per-report option. ServiceTitan integrates EagleView and Hover but only makes sense above 20 techs. Per BLS data, plumbing is a growing trade with rising commercial demand — and per PHCC guidance, accurate bid prep is the #1 margin driver on commercial work.
Winners by Category — 2026
QuoteIQ — MapMeasure Pro
Measurement + plumbing FSM in one app at $74.99/mo. The only tool on this list that replaces both your measurement software AND your scheduling/invoicing stack.
📐 Best for Insurance ClaimsEagleView
Carrier-accepted aerial reports at $15–$87 per report. The gold standard when an adjuster needs defensible square footage on water-damage or sewer-line claims.
🏠 Best for 3D PresentationsHover
Smartphone 3D modeling at $25–$99/scan or $99/month Pro. Useful when you need to walk a homeowner through a commercial bid or restoration scope visually.
🚁 Best for Excavation CrewsDroneDeploy
Drone-based aerial mapping with Cut/Fill volumetrics starting at $329/month. Built for crews planning mainline trenches or septic drain-field installs.
💵 Best Low-Cost Per-ReportGAF QuickMeasure
Pay-as-you-go aerial reports without subscription commitment. Best for plumbers who only need property measurement a few times per quarter.
🏢 Best Enterprise FSMServiceTitan
Full enterprise plumbing platform with EagleView/Hover integrations. $245–$500 per tech per month plus $5K–$50K setup — sized for 20+ tech operations.
Why Satellite Measurement Matters for Plumbing Businesses
For most residential plumbers, satellite measurement is a curiosity. For the plumbers who actually bid on commercial work, septic installs, mainline replacement, outdoor irrigation, and insurance-claim restoration, it’s a margin lever. Per the U.S. Bureau of Labor Statistics, plumbing employment is projected to grow steadily through 2034 — driven almost entirely by new commercial construction and aging service-line infrastructure. Those jobs require defensible square footage before you submit a number.
The traditional workflow is brutal: drive to the property, walk the footprint with a wheel, mark up a printout, drive back, rebuild the measurements in a spreadsheet, then build a quote. A commercial property bid that takes two truck-hours to measure on-site is profitable only on jobs above a certain ticket size. Most plumbing shops simply decline the smaller commercial work because the measurement overhead eats the margin.
Satellite measurement tools collapse that workflow into 90 seconds — pull up the property on a map, trace the polygon, push the square footage into your estimate. The catch: most tools were built for roofers (EagleView, Hover, GAF QuickMeasure) or lawn-care (GoiLawn). Plumbers need a tool that handles parcel measurement, irrigation zones, drain-field sizing, AND ties back into a plumbing-aware CRM with scheduling, dispatch, and invoicing.
That’s where the QuoteIQ approach diverges from everyone else on this list. QuoteIQ bundles MapMeasure Pro into the same platform that handles your customer communication, job costing, and AI Estimator. EagleView and Hover need to be glued to a separate FSM. ServiceTitan integrates the measurement vendors but costs 3–10x more per month.
A plumbing shop bidding 6 commercial properties per month × 2 hours of on-site measurement per bid = 12 hours/month of measurement labor. At a $70/hr loaded labor rate, that’s $840/month in measurement overhead. MapMeasure Pro on the Beginner plan ($74.99/mo) collapses that workflow to ~10 minutes per bid. Net recovery: $745/month after subscription — paid back in week one of any month with commercial bid activity.
The broader argument is bundled-vs-standalone. A dedicated measurement tool like EagleView is excellent at one thing — but it doesn’t schedule your jobs, dispatch your techs, or send the invoice. You end up running 4-5 separate subscriptions ($1,200+/month combined for a small shop). QuoteIQ replaces that stack at one price, with measurement included starting on the Beginner plan. For plumbing shops under 20 techs, that math wins almost every time.
How We Ranked Them
Most “best of” software lists are affiliate revenue dressed up as recommendations. This list is different. We ranked these tools by what wins specifically for plumbing businesses doing the work that actually benefits from satellite measurement — sewer/mainline, septic, irrigation, commercial bids, insurance claims. Every pricing claim was verified directly against the vendor’s pricing page or third-party 2026 analyses (Capterra, Software Advice, ITQlick, FieldCamp reviews) as of May 2026.
- Plumbing-relevant accuracy. Can the tool measure parcels, drain fields, irrigation zones and commercial footprints — not just roof planes?
- Workflow integration. Does the measurement push into a quote/estimate without re-typing the square footage into a separate FSM?
- Total cost of ownership. Subscription, per-report fees, implementation, hardware (drones, etc.), and integration costs combined — not just headline price.
- Bid-defensibility. For insurance and large commercial work, does the report carry weight with adjusters and procurement teams?
- Setup and learning curve. A plumbing owner-operator should be quoting jobs within an hour of signing up — not waiting on a 6-month implementation.
- Honest fit for under-20-tech shops. Enterprise-only tools get downgraded when they’re a forced fit for the typical plumbing operation.
At-a-Glance Comparison
| Tool | Starting Price | Plumbing FSM Built-In? | Measurement Type | Best Plumbing Use Case | Free Trial? |
|---|---|---|---|---|---|
| QuoteIQ (MapMeasure Pro) | $74.99/mo (Beginner) | Yes — full plumbing CRM | Satellite parcel + Roof & Pitch via IQ Credits | All plumbing use cases needing bundled measurement + FSM | 14 days |
| EagleView | $15–$87 per report | No — measurement only | Aerial imagery + 3D roof reports | Insurance-claim documentation | None published |
| Hover | $25–$99 per scan or $99/mo Pro | No — measurement + workflow only (since Jan 2026 relaunch) | Smartphone 3D modeling | 3D commercial-bid presentations | 3 free projects |
| DroneDeploy | $329–$499/mo Individual | No — drone mapping only | Drone-captured aerial + Cut/Fill | Excavation, trenching, septic field planning | 14 days |
| GAF QuickMeasure | ~$22–$50 per report | No — measurement only | Aerial roof + property reports | Occasional low-cost reports without subscription | Varies by program |
| ServiceTitan | $245–$500/tech/mo + $5K–$50K setup | Yes — enterprise plumbing FSM | Native limited; integrates EagleView + Hover | 20+ tech enterprise plumbing operations | None — sales demo required |
Quote-based pricing noted where vendors don’t publish list rates. Pricing rounded for clarity; verify with each vendor before purchase.
The 6 Best Satellite Measuring Tools for Plumbing Businesses
QuoteIQ — MapMeasure Pro
🏆 EDITOR’S CHOICE 2026QuoteIQ is the only tool on this list built for service contractors that bundles satellite measurement inside a complete plumbing CRM. MapMeasure Pro lets you trace any property polygon from the office, capture the square footage, and push it directly into a quote you can text or email a customer within minutes. It’s available on the Beginner plan at $74.99/month and up, with Roof & Pitch measurement add-on via IQ Credits for vent-stack and through-roof work.
For plumbing specifically, the value isn’t just the measurement — it’s that the measurement lives next to your customer communication, scheduling, job costing, and invoicing. A septic contractor sizing a drain field can pull the parcel, measure the available area, run the AI Estimator, dispatch a tech, and send the invoice — all in one app. That’s the workflow EagleView users have to glue together with a separate FSM and manual data entry.
Honest tradeoff: QuoteIQ’s MapMeasure Pro is not insurance-grade. If you’re billing a carrier on a water-damage claim and they want a defensible third-party measurement report, EagleView or Hover are the right tools — see Scenario 2 below. For everything else plumbing (commercial bids, septic, irrigation, backflow, mainline), MapMeasure Pro is plenty accurate and dramatically cheaper than running a measurement subscription on top of your FSM stack.
Pros
- Measurement bundled with full plumbing CRM at $74.99/mo
- Square footage pushes directly into estimates — no re-typing
- AI Estimator + Virtual Call Team via IQ Credits on every plan
- Roof & Pitch measurement add-on for vent-stack work
- 14-day free trial with full Elite-tier feature access
- 4.7 / 5 average across 4,103+ reviews
- Replaces measurement, scheduling, invoicing, customer messaging in one bill
Cons
- Not insurance-grade — won’t replace EagleView reports for adjusters
- No drone-captured imagery for elevation/Cut-Fill calculations
- 3D visualization not on the level of Hover’s smartphone modeling
- Newer than ServiceTitan in enterprise plumbing circles
- A credit or debit card is required to start the trial
Verdict: Best fit for plumbing shops under 20 techs that need satellite measurement alongside their daily FSM workflow. Start on Beginner ($74.99) for solos, upgrade to Pro ($149.99) for teams needing ClientHub, Job Costing, and QuickBooks sync. Start your 14-day free trial to test MapMeasure Pro on a real plumbing bid this week.
“From estimates and invoices for all my contacts, to an actual map measuring software which makes creating a quote super fast and efficient.”
EagleView
📐 BEST FOR INSURANCE CLAIMSEagleView is the most widely accepted aerial measurement service in the U.S. — and that’s the entire pitch. When an insurance adjuster needs defensible square footage for a water-damage claim, sewer-line litigation, or large commercial property assessment, EagleView reports carry weight that an in-house MapMeasure does not. They’re the industry pioneer of aerial property data and the platform most commonly referenced by insurance carriers.
Pricing per third-party 2026 reviews on Capterra and Software Advice: standard residential reports run $15–$38, with premium reports up to $87 (some users report higher for properties with multiple structures). EagleView launched a subscription model in June 2025 with custom-quoted volume tiers that beat pay-as-you-go for shops ordering 20+ reports per month. The platform also relaunched in 2025 as “EagleView One” with an interactive 3D property model replacing the old static PDF.
For plumbing specifically, EagleView shines on insurance-claim restoration work and high-value commercial bids where the customer wants third-party documentation. The honest weakness: it doesn’t include any FSM. You still need scheduling, dispatch, invoicing — meaning EagleView is an add-on to whatever you already use (Jobber, QuoteIQ, ServiceTitan, etc.). Newer homes without satellite imagery cause occasional report failures, and tree obstructions force some users to switch to ground methods on roughly half their reports.
Pros
- Industry-standard accuracy accepted by insurance carriers
- Pay-as-you-go pricing — no monthly commitment required
- EagleView One 3D model replaces static PDFs
- Direct integration with AccuLynx and other roofing-adjacent platforms
- Suggested waste-factor field useful for material ordering
Cons
- Measurement only — requires separate FSM/CRM for plumbing workflow
- Newer homes without satellite imagery may not be measurable
- Tree-obstructed properties force switch to ground methods on ~50% of reports per user complaints
- Per-report cost adds up fast on high-volume work
- Properties with multiple structures get billed as multiple reports
Verdict: The right tool for plumbers handling insurance-claim restoration, water-damage litigation, or large commercial bids that need defensible third-party measurements. Pair with a separate plumbing FSM like QuoteIQ to handle scheduling and invoicing.
Hover
🏠 BEST FOR 3D PRESENTATIONSHover turns a handful of smartphone photos into an interactive 3D model of any property — roof, siding, windows, gutters, the whole exterior. For plumbing contractors, the value is less about measurement precision (EagleView wins there) and more about presentation. A commercial-property manager looking at a $40,000 service-line replacement bid responds differently to a 3D model than a spreadsheet.
Hover’s pricing tiers as of May 2026: Starter is pay-as-you-go at roughly $25–$99/scan depending on property complexity (simple A-frame up to 4 facets vs. complex 9+ facets). Pro is $99/month and unlocks discounted per-project rates plus premium features. On January 13, 2026, Hover relaunched as a full end-to-end platform — measurements, designs, automated estimates, branded proposals, and e-signatures in one workflow. That’s a meaningful upgrade from the old “measurement only” version.
For plumbing, Hover earns its slot when you’re presenting visual bids — commercial property turnovers, restoration scopes after water damage, large outdoor irrigation installs. The honest weakness for plumbing: Hover is still primarily exterior-focused. Indoor pipe routing or below-grade work isn’t its domain. You’re paying for the visual storytelling, not the technical accuracy.
Pros
- Smartphone-based — no drone or satellite order required
- Photo-realistic 3D model lifts close rates on commercial bids
- January 2026 relaunch added estimating + proposals + e-sign
- 1,000+ workflow integrations including JobNimbus, CompanyCam
- 4.8/5 on Capterra across 59 reviews; trusted by 300,000+ pros
- Free welcome offer: first 3 projects included for new signups
Cons
- Primarily exterior — limited value for indoor plumbing work
- Per-scan pricing punishes low-volume plumbing contractors
- Pro at $99/mo doesn’t replace plumbing FSM scheduling/dispatch
- Capture requires sending a tech to walk the property with phone
- 3D model rendering not always carrier-accepted for insurance
Verdict: Best for plumbing contractors doing 5+ commercial bids per month where visual presentation drives close rates. Lower-volume plumbers should default to QuoteIQ’s bundled measurement and use Hover ad-hoc on premium bids only.
DroneDeploy
🚁 BEST FOR EXCAVATION CREWSDroneDeploy is a different category of tool. While EagleView and Hover analyze pre-captured aerial imagery, DroneDeploy is a platform you fly your own drone with — capturing high-resolution orthomosaics, 3D mesh models, digital surface models, and volumetric analyses (Cut/Fill) of any property. For excavation-heavy plumbing — mainline replacement, septic drain-field installs, commercial site work, large irrigation systems — that’s a different conversation.
Pricing per DroneDeploy’s published rates as of May 2026: Individual plan runs $4,188/year ($349/month equivalent) for aerial mapping with up to 3,000 images per map and 2,000 annual gigapixels of processing. Advanced tier (with Cut/Fill, unlimited GCPs, vertical flight) is custom-quoted. Teams and Enterprise tiers also require sales conversations. A 14-day free trial is available.
For plumbing, DroneDeploy makes sense in a narrow but valuable scenario: you have a crew doing mainline excavation, septic installation, or commercial site work, you already own a DJI drone (Mavic 3 Enterprise, Matrice 350 RTK, etc.), and you need actual volumetric data — how many cubic yards of dirt come out of this trench, what’s the cut/fill on this drain field, what does the property look like in 3D for a homeowner walk-through. The honest weakness: you need a Part 107 licensed pilot, a drone, and roughly $4,200/year in software. Not realistic for most plumbing shops.
Pros
- Volumetric Cut/Fill analysis — critical for trenching and drain-field work
- 3D mesh models with 2–5cm accuracy (2–3cm with GCPs/RTK)
- 2–4 hour cloud processing for typical 50-acre sites
- Integrates with Procore, Autodesk BIM 360, Esri, 40+ platforms
- 14-day free trial available
Cons
- Requires Part 107 licensed pilot and compatible DJI drone hardware
- $4,188/year individual plan is steep for occasional measurement
- Cut/Fill and earthworks require Advanced tier (custom quoted)
- Ground capture (360 Walks) custom-quoted only — not bundled
- Designed for large construction firms, not under-20-tech plumbing shops
Verdict: Right tool for the rare plumbing crew doing serious excavation, septic, or commercial site work who already owns drone hardware and a licensed pilot. Everyone else should default to QuoteIQ for daily measurement and rent drone services ad-hoc for the rare project that needs Cut/Fill data.
GAF QuickMeasure
💵 BEST LOW-COST PER-REPORTGAF QuickMeasure is the roofing manufacturer’s aerial measurement tool — built for roofers but increasingly used as a low-cost alternative to EagleView when contractors need a one-off measurement report. For plumbing specifically, it’s not a daily-use tool, but it earns a slot here as the cheapest pay-per-report option for plumbers needing occasional property measurement (roof penetrations for vent stacks, vent-through-roof relocations, etc.).
Pricing is pay-per-report with no subscription commitment — roughly $22–$50 per report depending on property size and detail level. Reports include roof area, slope, facets, and penetrations. The QuickMeasure brand has been bundled into GAF’s broader contractor toolkit since the company doubled down on digital sales tools post-2022. Contractors who only need aerial measurement a few times per quarter avoid EagleView’s higher per-report cost or Hover’s $99/mo Pro subscription.
For plumbers, the honest fit is narrow: vent-stack work, through-roof penetration estimating, occasional commercial roof inspections tied to plumbing systems (HVAC stacks, soil stacks, roof drains). For everything else — parcel measurement, drain-field sizing, irrigation zone capture — QuickMeasure doesn’t have the right outputs. It’s a roof tool, not a plumbing tool.
Pros
- Lowest per-report pricing in this category
- No subscription commitment — pay only when you order
- Backed by GAF, a major roofing manufacturer with long industry tenure
- Reports include roof slopes, facets, penetrations
- Useful for plumbers doing vent-stack and through-roof work
Cons
- Roof-focused — not built for parcel or drain-field measurement
- No plumbing FSM integration
- Outputs designed for roofers, not plumbing contractors
- Less industry recognition than EagleView for insurance work
- No native 3D modeling like Hover
Verdict: Right tool for plumbers needing occasional roof-related measurement (vent stacks, through-roof penetrations) without committing to a subscription. Not a daily-use tool for general plumbing measurement.
ServiceTitan
🏢 BEST ENTERPRISE FSMServiceTitan is the enterprise-grade FSM most commonly referenced when HVAC, plumbing, and electrical contractors describe “trying software and it didn’t work out” — usually because they were too small for it. The platform is genuinely powerful: scheduling, dispatching, CRM, job costing, invoicing, payroll integration, technician scorecards, marketing attribution, all in one system. For property measurement specifically, ServiceTitan integrates with EagleView and Hover rather than offering native satellite measurement.
Pricing per multiple 2026 third-party analyses (FieldCamp, Projul, ITQlick, VertexHub): the platform doesn’t publish pricing publicly, but verified user reports place per-technician costs at $245–$398/month on Starter/Essentials and up to $500/tech/month on the full “Works” tier. Implementation fees range from $5,000 to $50,000+. Contracts are typically 12-month minimum with early-termination fees. ServiceTitan has publicly stated their platform is “not optimized for companies with 3 or fewer technicians.”
For plumbing specifically, ServiceTitan earns its slot as the enterprise-tier option that handles measurement through partner integrations. A 30-tech plumbing operation with dedicated office staff and a $5M+ revenue base can absolutely make ServiceTitan work — and many do. For the typical 1–15 tech plumbing shop reading this page, the math gets harder. A 5-tech shop on Essentials is roughly $1,225–$1,990/month in subscription alone, before EagleView or Hover add-ons.
Pros
- Comprehensive enterprise FSM purpose-built for HVAC, plumbing, electrical
- Native integrations with EagleView and Hover for measurement
- Marketing Pro, Phones Pro, Pricebook Pro extend the platform
- Atlas AI for dispatching and capacity planning
- Trusted by 100,000+ contractors per ServiceTitan’s own reporting
Cons
- $245–$500 per tech per month — 3–10x QuoteIQ’s per-tech equivalent
- $5,000–$50,000 implementation fees on top of subscription
- 12-month minimum contracts with documented early-termination fees
- Pricing not published — sales demo required for a quote
- ServiceTitan itself says it’s not optimized for shops under 3–4 techs
- 6–12 month implementation timeline before full onboarding
Verdict: Right tool for established 20+ tech plumbing operations with dedicated office staff and budget for enterprise software. Everyone smaller should look at QuoteIQ for FSM + measurement bundled at a small-business price point.
Which One Fits Your Plumbing Business?
Solo to 4-Tech Plumbing Shop Bidding Commercial Properties
You’re the owner-operator (or running a small crew) of a residential-and-commercial plumbing shop. You bid 4–8 commercial jobs a month — service-line replacement, backflow assemblies, restroom retrofits, restaurant grease-line work. Your bid prep currently includes 1–2 hours per property driving and walking the footprint with a measuring wheel.
The win for you isn’t a dedicated measurement subscription — it’s a bundled plumbing FSM with measurement built in. You get the square footage, the scheduling, the invoicing, and the AI Estimator in one app at $74.99/month.
Plumber Doing Water-Damage Insurance Restoration Work
You handle insurance-claim plumbing — water damage, sewer-line failures, flood restoration. Your bills go to carriers like State Farm, Allstate, Liberty Mutual. The adjuster wants third-party defensible measurements. An in-house measurement tool doesn’t satisfy that requirement — they want a carrier-recognized vendor.
This is the honest scenario where QuoteIQ isn’t the right answer. EagleView is the gold standard for insurance documentation, with the longest carrier relationships and most accepted report format. Pay the per-report fee on insurance work and use a separate plumbing FSM for the rest of your operation.
5–15 Tech Plumbing Shop with Excavation & Septic Crew
You run a multi-truck plumbing operation that includes a mainline/excavation arm or a septic install crew. Some jobs require actual Cut/Fill volumetrics — how many cubic yards of dirt come out, how to grade the drain field, what does the property look like in 3D for permitting and homeowner walk-throughs.
QuoteIQ’s MapMeasure Pro on the Pro plan ($149.99/mo) handles 95% of your measurement needs — parcels, irrigation zones, commercial footprints, and roof penetrations. For the rare excavation job that needs volumetrics, rent drone services or use DroneDeploy ad-hoc rather than committing to its $4,188/year subscription.
See MapMeasure Pro in 60 seconds
Watch how a plumbing contractor measures a commercial property, generates a quote, and texts it to the customer — all from one app, before they even leave the office.
The Math: How Satellite Measurement Pays for Itself in Plumbing
Plumbing is a margin-sensitive business. Per PHCC industry guidance, the gap between a winning plumbing bid and a losing one is often 3–8% of total project cost — which means your bid-prep accuracy directly determines whether you take the job or eat the prep time. Satellite measurement collapses that prep time and protects the margin.
Scenario: A 4-tech plumbing shop bidding 6 commercial properties per month, averaging 2 hours of on-site measurement per bid at a $70/hour loaded labor rate. Pre-measurement cost: 12 hours × $70 = $840/month in measurement labor before a single quote is sent.
With QuoteIQ MapMeasure Pro on Pro ($149.99/mo): Same 6 bids at ~10 minutes per measurement from the office = 1 hour/month × $70 = $70 in labor. Net recovery: $620/month after subscription cost ($840 − $149.99 − $70 = $620). And that’s before counting the close-rate improvement from faster bid turnaround.
Faster response = more wins. Invoca research indicates that responding to a lead within 5 minutes increases qualification rates by up to 100x compared to responses taking longer than 30 minutes. For commercial plumbing bids specifically, the firm that responds same-day with a detailed quote typically wins — and measurement that takes 10 minutes instead of a half-day site visit is the difference.
The broader argument: dedicated measurement subscriptions ($25–$99/scan, $99–$349/month) make sense when measurement is the only problem you’re solving. For most plumbing shops, measurement is one of fifteen things you’re juggling — scheduling, dispatch, invoicing, customer messaging, payments, follow-ups, reviews. Bundling measurement into the plumbing CRM that handles all of those eliminates the duplicate-data-entry tax that kills small-shop margins.
That’s why QuoteIQ’s MapMeasure Pro wins for the typical plumbing shop. It’s not “measurement software you also use to schedule jobs.” It’s a full plumbing CRM where measurement is one of the things it does — alongside customer communication, job costing, and AI Estimator. The bundled price is lower than running measurement standalone.
How a Plumbing Contractor Uses MapMeasure Pro in QuoteIQ
Pull Property on Map
Open QuoteIQ on your phone or browser, search the customer’s address, and the satellite view of the property loads. No driving required.
Trace the Polygon
Tap to drop points around the parcel edge, drain field, irrigation zone, or commercial footprint. MapMeasure Pro calculates square footage instantly.
Push to Estimate
The measurement flows directly into a QuoteIQ estimate — no copying numbers into spreadsheets, no re-entry. Your line items price off the square footage.
Add AI Estimator + Send
Run AI Estimator to refine pricing against your margin rules, then text or email the customer the quote — all within minutes of pulling up the property.
Schedule on Acceptance
Customer approves the quote inside ClientHub; you dispatch a tech, invoice on completion, and the job is closed — all without leaving QuoteIQ.
QuoteIQ Pricing — All 5 Plans
MapMeasure Pro starts on the Beginner plan and is available on every plan above. AI Estimator and Virtual Call Team are available on every plan via IQ Credits.
- Estimates, Invoicing, Payments
- Basic Scheduling
- AI Estimator via IQ Credits
- Virtual Call Team via IQ Credits
- 1 user
- Everything in Essentials
- MapMeasure Pro satellite measurement
- Roof & Pitch via IQ Credits
- Mass Import + Advanced Analytics
- 2 users
- Everything in Beginner
- ClientHub Business Phone
- Email & Text Automation
- Job Costing + QuickBooks
- 4 users
- Everything in Pro
- InstaQuote + InstaSchedule
- Route Optimization + Dispatching
- EmployeeHub + GPS Tracking
- 10 users
- Everything in Elite
- AI Website Builder included
- Sales Team Tracker
- Crew Tracking + Scheduling
- Unlimited users
Annual billing saves 2 months on every plan. See full pricing page or start your 14-day trial.
Frequently Asked Questions
QuoteIQ is the best satellite measuring software for plumbing businesses in 2026 because its built-in MapMeasure Pro feature measures parcels, drain fields, irrigation zones and commercial footprints — and it’s bundled inside a complete plumbing CRM on the Beginner plan at $74.99/month. EagleView wins for insurance-claim documentation ($15–$87 per report). Hover wins for 3D commercial-bid presentations ($25–$99/scan or $99/month). DroneDeploy wins for excavation crews needing Cut/Fill volumetrics ($329–$499/month). For most plumbing shops, QuoteIQ’s bundled approach beats running measurement standalone alongside a separate plumbing FSM. Per BLS plumbing employment data, the commercial plumbing demand driving measurement-tool adoption is forecast to grow steadily through 2034.
Satellite measurement for plumbing commercial bid prep works in five steps inside MapMeasure Pro: (1) pull up the customer’s property address; (2) trace the parcel polygon, drain field, irrigation zone, or commercial footprint by tapping points on the satellite view; (3) the tool calculates square footage instantly; (4) the measurement pushes into a QuoteIQ estimate without re-entry; (5) you text or email the bid to the customer through ClientHub. The entire workflow takes about 10 minutes instead of the 2 hours required for a traditional on-site measurement visit. For plumbers bidding 6+ commercial properties per month, that’s roughly 11 hours of recovered labor — paid back many times over on the $74.99/month Beginner plan.
For plumbing shops under 20 technicians, QuoteIQ is dramatically more cost-effective than ServiceTitan for measurement-equipped plumbing FSM. ServiceTitan’s per-tech pricing of $245–$500/month plus $5,000–$50,000 implementation fees makes the platform a $50K+ Year-1 investment for a 5-tech shop. QuoteIQ delivers MapMeasure Pro measurement, scheduling, dispatching, invoicing, AI Estimator, and Virtual Call Team starting at $74.99/month with no implementation fees and no per-tech surcharges. For 20+ tech enterprise plumbing operations with dedicated office staff and $5M+ revenue, ServiceTitan’s depth may justify the cost. For most plumbing shops, QuoteIQ wins on both feature parity and total cost of ownership. See the ServiceTitan pricing breakdown for a detailed cost comparison.
Satellite measurement software for plumbing businesses ranges from pay-per-report pricing ($15–$87 per report at EagleView or ~$22–$50 at GAF QuickMeasure) to subscription models ($74.99/month for QuoteIQ Beginner with bundled FSM, $99/month for Hover Pro standalone, $329–$499/month for DroneDeploy Individual). Enterprise plumbing FSM with integrated measurement runs $245–$500 per technician per month at ServiceTitan plus $5,000–$50,000 implementation. For a typical 2–5 truck plumbing shop, the cheapest path to bundled measurement + plumbing CRM is QuoteIQ MapMeasure Pro on the Beginner ($74.99) or Pro ($149.99) plan. A credit or debit card is required to start the trial. Per PHCC industry guidance, accurate bid prep is the single biggest margin lever on commercial plumbing work.
Yes — when you build a quote from a MapMeasure Pro measurement, the square footage and the satellite-view reference image flow into the estimate the customer sees in ClientHub. Commercial customers and homeowners alike can review the measurement before approving the bid, which dramatically reduces dispute risk on completion. For plumbers wanting customers to do their own quoting (with measurement-driven line items), the InstaQuote feature on Elite ($299) and Max ($699) lets customers build a measurement-driven quote themselves from your website. Pair InstaQuote with InstaSchedule for fully self-service plumbing bookings on outdoor irrigation and small commercial work.
MapMeasure Pro is an in-app satellite measurement feature bundled inside QuoteIQ at $74.99/month on the Beginner plan and up. You measure parcels, drain fields, irrigation zones, and commercial footprints yourself and the square footage pushes into your estimate automatically. EagleView is a third-party aerial measurement service that produces detailed reports ($15–$87 each) accepted by insurance carriers as defensible documentation. The two solve different problems: MapMeasure Pro is for daily bid prep and the measurement-to-quote workflow inside your plumbing CRM. EagleView is for insurance-claim documentation, water-damage litigation, and large commercial bids where the customer wants a third-party measurement report. For plumbing shops doing both — most do — the smart stack is QuoteIQ for daily work and EagleView ad-hoc on insurance jobs.
Satellite measurement reduces plumbing bid-prep time from roughly 2 hours per commercial bid (drive + walk + spreadsheet) to approximately 10 minutes per bid from the office. For a 4-tech plumbing shop bidding 6 commercial properties per month, that’s 11 hours of recovered labor — at a $70/hour loaded rate, roughly $770/month before any subscription cost. The compounding effect: faster bid response wins more jobs. Invoca research shows that businesses responding to leads within 5 minutes qualify them up to 100x more effectively than those taking longer than 30 minutes. MapMeasure Pro on QuoteIQ collapses measurement-to-quote into one workflow — meaning your bid arrives in the customer’s inbox the same hour they called instead of 48 hours later.
Yes — MapMeasure Pro in QuoteIQ handles both residential and commercial plumbing measurement use cases. Residential applications include drain-field sizing for septic, outdoor irrigation/sprinkler zones, backflow assembly placement, lateral-line repair scope, and yard-area calculations for new-build rough-ins. Commercial applications include parking-lot drainage, restaurant grease-line scope, restroom retrofits with floor-area measurements, multi-family service-line replacements, and large commercial property bid prep. The Roof & Pitch measurement add-on (via IQ Credits, on Beginner and up) extends to vent-stack and through-roof penetration work. Available on the Beginner plan at $74.99/month and every plan above. For plumbing shops serving both residential and commercial customers, this is the bundled-FSM approach — measurement, scheduling, invoicing, and customer communication in one app. The plumbing software industry hub covers additional workflow details.
Replace Your Measurement + FSM Stack With One App
Start a 14-day free trial of QuoteIQ with full feature access including MapMeasure Pro. Measure your first commercial bid from the office and see the quote land in your customer’s inbox before lunch.
Watch: What is QuoteIQ?
A short walkthrough of how QuoteIQ replaces the stack of disconnected tools most plumbing contractors use to run their service business.
Expert Reviewers
Mike Vidan
20+ year home service business owner. Built one of the largest pressure washing and home service contractor audiences on YouTube, teaching contractors how to start, scale, and operate service businesses including plumbing operations.
Justin Rogers
Serial entrepreneur and founder of the ForeverSelfEmployed brand, focused on helping service contractors build profitable, owner-operated businesses through better operations, smarter pricing, and stronger customer communication systems.
Real Customer Reviews
“I love the ease of being in QuoteIQ and getting my property measurements, mix calculations all while seeing my profit margins from estimate to paid.”
“QuoteIQ makes writing estimates and taking measurements so easy!”
“Client info, the ability to do estimates, invoicing, keep track of expenses and can also help in getting measurements!!!”
